Processor Retention Bracket - Compaq ProLiant 1600 Maintenance And Service Manual

2-25

Processor Retention Bracket

To remove the processor retention bracket:
1. Perform the preparation procedures. See page 2-2.
2. Remove the processor cage (see page 2-22) and open the cage door.
3. Lift the processor from the processor cage. See page 2-24.
4. Remove the two security screws, 1 and lift the processor retention bracket from the
processor board and cage 2.
1
2
1
Figure 2-21. Removing the processor retention bracket.
Reverse steps 1 through 4 to replace the processor retention bracket.
Compaq ProLiant 1600 Servers Maintenance and Service Guide