Top Cover - Compaq ProLiant 1600 Maintenance And Service Manual

2-10 Removal and Replacement Procedures

Top Cover

Remove the top cover to service the PCI and ISA boards, system switches, IDE CD-ROM
drive cables, diskette drive cables, I/O fan with bracket, and the power switch.
To remove the top cover:
1. Perform the preparation procedures. See page 2-2.
2. Open the front bezel.
3. Loosen the thumbscrew attaching the top cover to the chassis 1.
4. Slide the top cover back and out 2.
5. Lift the top cover from the chassis.
Figure 2-5. Removing the top cover
Reverse steps 1 through 5 to replace the top cover.
WARNING: To reduce the risk of personal injury from hot surfaces,
allow the internal system components to cool before touching them.
2
1