Multiple Ways Of Viewing The Log - Compaq ProLiant 1600 Maintenance And Service Manual

Multiple Ways of Viewing the Log

You can view an event in the IML in several ways:
On the Integrated Management Display
From within Compaq Insight Manager
From within Compaq Survey Utility
From within IML Management Utility
Integrated Management Display
The Integrated Management Display is a Liquid Crystal Display (LCD) panel that presents
information directly at the server, assisting in diagnosing and servicing the server without a
keyboard and monitor.
Compaq Insight Manager
Compaq Insight Manager is a server management tool providing in-depth fault configuration
and performance monitoring of hundreds of Compaq servers from a single management
console. System parameters that are monitored describe the status of all key server
components. By being able to view the events that may occur to these components, you can
take immediate action. You can view and print the event list from within Compaq Insight
Manager by following the instructions below. You can also mark a critical or caution event as
repaired after the affected component has been replaced. For example, when a fan that has
failed has been replaced. By marking as repaired, you can lower the severity of the event.
Viewing the Event List
1. From Compaq Insight Manager, select the appropriate server, then select View Device
Data. The selected server is displayed with buttons around its perimeter.
2. Select the Recovery button.
3. Select Integrated Management Log.
4. If a failed component has been replaced, select the event from the list, then select Mark
Repaired.
Printing the Event List
NOTE: You can only view the list from the Recovery/Integrated Management
Log screen as described above.
1. From the Insight Manager, select the appropriate server.
2. Select the Configuration button.
3. Select the Recovery button.
4. Select Print.
Compaq ProLiant 1600 Servers Maintenance and Service Guide
3-61