Compaq Network Interface Cards Test Error Codes - Compaq ProLiant 1600 Maintenance And Service Manual

3-38 Diagnostic Tools
Compaq Network Interface Cards
Test Error Codes
The 6000 series of Diagnostic error codes identifies failures with 32-bit DualSpeed NetFlex-
2/Token Ring Controllers. Corrective action may require replacement of the 32-bit DualSpeed
NetFlex-2/Token Ring Controller.
Error Code
6000-xx
6001-xx
6002-xx
6014-xx
6016-xx
6028-xx
6029-xx
6089-xx
6090-xx
6091-xx
6092-xx
Compaq Network Interface Cards
Description
Network card ID failed.
Network card setup failed.
Network card transmit failed.
Network card configuration failed.
Network card reset failed.
Network card internal failed.
Network card external failed.
Network card open failed.
Network card initialization failed.
Network card internal loopback failed.
Network card external loopback failed.
Table 3-15
Test Error Codes
The following steps apply to error codes
6000-xx through 6092-xx:
1. Check the controller installation in the
EISA slot.
2. Check the interrupt type and number
setting.
3. Check the media connection at the
controller and Multistation Access Unit
(MAU).
4. Check the media speed (4/16 ) and type
Unshielded Twisted Pair/Shielded
Twisted Pair (UTP/STP) settings.
5. Check the MAU, cabling, or other
network components.
6. Replace the controller.
Recommended Action