Installing A Second Processor And Processor Power Module (Ppm); Installing A Second Processor - Compaq ProLiant ML350 Setup And Installation Manual

3-30 Compaq ProLiant ML350 Setup and Installation Guide
Installing a Second Processor and
Processor Power Module (PPM)

Installing a Second Processor

To install a second processor and PPM, refer to one of the following
installation sources:
I
For text and an illustrated procedure, refer to the installation
documentation that came with the option kit.
I
For an illustrated overview of the procedure, refer to the Quick Start
Poster included in the shipping box or to the System Configuration
Label located on the inside of the access panel.
IMPORTANT: The second processor must be the same speed as the first processor.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the
internal system components to cool before touching.
CAUTION: Before removing the access panel, make sure that the server is
powered down, all cables are disconnected from the back of the server, and the
power cord is disconnected from the grounded (earthed) AC outlet.
1. Follow the steps in "Removing the Access Panel" at the beginning of
this chapter.
For use with 1-GHz or greater Intel Pentium III processor-based server models only