Sw1 - System Maintenance Switch - Compaq ProLiant 1600 Maintenance And Service Manual

SW1 - System Maintenance Switch

Table 4-7 defines the function for each SW1 switch setting on the Compaq ProLiant 1600
Servers system I/O board. The default positions are indicated below. See Figure 4-4 and
Table 4-5 for the location of the switch.
Switch
1 Disable On-Board Video
2 Lock configuration
information
3 Tower-to-Rack Indication
4 Disable Diskette Boot
5 Disable Password
6 Invalidates NVRAM
Table 4-7
SW1 - System Maintenance Switch Settings
Function
On-board video is disabled.
You cannot change
configuration information.
Rack model.
System booting from the
diskette drive
is disabled.
Clears passwords.
Invalidates NVRAM.
Compaq ProLiant 1600 Servers Maintenance and Service Guide
ON
4-7
OFF
Default
Default
Disabled
Default
(Tower model)
Default
Default
Default