Backplane Board - Compaq ProLiant 1600 Maintenance And Service Manual

2-31

Backplane Board

To remove the backplane board:
1. Perform the preparation procedures. See page 2-2.
2. Remove the top cover. See page 2-10.
3. Remove the left side access panel. See page 2-9.
4. Remove the system I/O board cage. See page 2-18.
5. Remove the processor cage. See page 2-22.
6. Disconnect all cables from the backplane board.
7. Remove the three T-15 screws from the backplane board.
8. Slide the backplane board down slightly and pull it from its mounting posts.
Figure 2-27. Removing the backplane board
Reverse steps 1 through 8 to replace the backplane board.
Compaq ProLiant 1600 Servers Maintenance and Service Guide