I/O Fan With Bracket - Compaq ProLiant 1600 Maintenance And Service Manual

2-19

I/O Fan with Bracket

To remove the I/O fan with bracket:
1. Perform the preparation procedures. See page 2-2.
2. Remove the top cover. See page 2-10.
3. Loosen the single thumbscrew attaching the I/O fan with bracket to the chassis 1.
4. Tilt the top of the I/O fan with bracket forward and away from the chassis 2.
5. Disconnect the I/O fan with bracket cable and slide it out of the clip 3.
6. Lift the I/O fan with bracket away from the chassis.
1
2
3
Figure 2-15. Removing the I/O fan with bracket
Reverse steps 1 through 6 to replace the I/O fan with bracket.
Compaq ProLiant 1600 Servers Maintenance and Service Guide