Compaq ProLiant 1600 Maintenance And Service Manual page 68

POST Error Messages
Audible
Error Code Beeps
L=Long
S=Short
1798-Drive Array
- Array
Accelerator Write
Error Occurred.
Array
Accelerator is
disabled.
1799-Drive Array
- Drive(s)
Disabled due to
Array
Accelerator Data
Loss.Select "F1"
to continue with
logical drives
disabled. Select
"F2" to accept
data loss and to
re-enable logical
drives.
Beeps only: 2 2L, 2S
Long + 2 Short
(Run System
Configuration
Utility - F10 key)
(RESUME - F1
KEY)
Continued
Probable Source of
Problem
None Hard parity error while
writing data to posted-
writes memory.
None Volume failed due to loss
of data in posted-writes
memory.
Power is cycled.
Temperature too hot.
Processor fan not installed
or spinning.
None A configuration error
occurred during POST.
None As indicated to continue.
Compaq ProLiant 1600 Servers Maintenance and Service Guide
Action
Enable Array Accelerator.
Press F1 to continue with logical
drives disabled or F2 to accept
data loss and re-enable logical
drive.
Check fans.
Press F10 to run System
Configuration Utility.
Press the F1 key.
3-23