Processor Power Module - Compaq ProLiant DL760 Maintenance And Service Manual

Processor Power Module

To remove a Processor Power Module:
1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter.
2. Remove the Processor and Memory Module. See "Opening and Removing the Processor
and Memory Module" earlier in this chapter.
3. Rotate the ejector levers on the Processor Power Module outward
4. Remove the Processor Power Module
Figure 2-27. Removing a Processor Power Module
Reverse steps 1 through 4 to replace the Processor Power Module.
NOTE: The Processor Power Module is keyed for correct alignment.
CAUTION: The processor must be removed before you remove the Processor Power Module.
Attempting to remove the Processor Power Module before removing the processor could
damage the processor's electronic components.
1
2
CAUTION: The Processor Power Module must be installed before you install the accompanying
processor. Attempting to install the Processor Power Module afterward could damage its
electronic components.
Removal and Replacement Procedures 2-33
.

.