Compaq ProLiant 1600 Maintenance And Service Manual page 67

3-22 Diagnostic Tools
POST Error Messages
Error Code
1795-Drive Array
- Array
Accelerator
Configuration
Error.
Data does not
correspond to
this drive array.
Array
Accelerator is
temporarily
disabled.
1796-Drive Array
- Array
Accelerator Not
Responding.
Array
Accelerator is
temporarily
disabled.
1797-Drive Array
- Array
Accelerator Read
Error
Occurred.Data in
Array
Accelerator has
been lost.Array
Accelerator is
disabled.
Continued
Audible
Beeps Probable Source of
L=Long Problem
S=Short
None This indicates that while
the system was in use,
power was interrupted
while data was in the
Array Accelerator
memory.
The data stored in the
Array Accelerator does not
correspond to this drive
array.
None Array Accelerator is
defective or has been
removed.
None Hard parity error while
reading data from posted-
writes memory.
Action
Match the Array Accelerator to
the correct drive array, or run
the System Configuration Utility
to clear the data in the Array
Accelerator.
1. Check that the Array
Accelerator is properly
seated.
2. Run the System
Configuration Utility to
reconfigure the Compaq IDA-
2 without the Array
Accelerator.
Enable Array Accelerator.
Continued