Utilities Access - Compaq ProLiant 1600 Maintenance And Service Manual

3-2 Diagnostic Tools

Utilities Access

The Compaq SmartStart and Support Software CD contains the SmartStart program and many
of the Compaq utilities needed to maintain your system, including:
System Configuration Utility
Array Configuration Utility
Drive Array Advanced Diagnostics Utility
ROMPaq Firmware Upgrade Utilities
There are several ways to access these utilities:
Run the utilities on the system partition.
If the system was installed using SmartStart, the Compaq utilities will automatically be
available on the system partition. The system partition could also have been created
during a manual system installation.
To run the utilities on the system partition, boot the system and press F10 when you see the
following message: "Press F10 for system partition utilities." Then select the utilities from the
menu.
System Configuration Utility is available under System Configuration menu.
Array Configuration Utility is available under the System Configuration menu.
Drive Array Advanced Diagnostics Utility is available under the Diagnostics and
Utilities menu.
ROMPaq Firmware Upgrade Utility is available under the Diagnostics and Utilities
menu.
CAUTION: Do not select the Erase Utility when running the
SmartStart and Support Software CD. This will result in data loss to
the entire system.