Compaq ProLiant 1600 Maintenance And Service Manual page 48

Run the utilities from diskette.
You can also run the utilities from their individual diskettes. If you have a utility
diskette newer than the version on the SmartStart and Support Software CD, use that
diskette.
You can also create a diskette version of the utility from the SmartStart and Support
Software CD. To create diskette versions of the utilities from the CD:
1. Boot the Compaq SmartStart and Support Software CD.
2. From the Compaq System Utilities screen, select Create Support Software and select
Next.
3. Select the diskette you would like to create from the list and follow the instructions on
the screen.
4. Run the utilities from the Compaq SmartStart and Support Software CD.
IMPORTANT: Only the System Configuration Utility and the Array
Configuration Utility can be executed from the Compaq SmartStart and
Support Software CD. All other utilities can be executed only from the
system partition or from diskette.
To run these utilities directly from the Compaq SmartStart and Support Software CD:
1. Boot the Compaq SmartStart and Support Software CD.
2. From the Compaq System Utilities screen, select the utility you wish to run and select
Next.
To execute the System Configuration Utility, select Run System Configuration
Utility.
To execute the Array Configuration Utility, select Run Array Configuration Utility.
Compaq ProLiant 1600 Servers Maintenance and Service Guide
3-3