Steerlng Gear And Linkage - Mazda 1990 323 Workshop Manual Supplement

ENGINE SPEED SENSING POWER STEERING
N
STEERlNG GEAR AND LlNKAGE
Removal / Installation
--
1. Loosen the wheel lug nuts.
2. Jack up the front of the vehicle and support it with safety stands.
3. Remove the wheels.
4. Remove the battery and the battery tray.
5. Remove the undercover.
6. Remove in the order shown in the figure, referring to Removal Note.
7. Install in the reverse order of removal, referring to Installation Note.
8. After installation, bleed air from the steering system.
8-27 (1.8-2.7, 13-
9-49 (4-5, 29-36)
42-57 (4.3-5.8, 31-42)
93-l 17 (9.5-l l-9, 69-86)
\93--117 (9.5-11.9, 69-86)
N-m (m-kg, ft-lb)
03UONX-811
1. Crossmember
2. Cotter pin
3. Nut
4. Tie-rod end/Steering knuckle
5. Pressure pipe
6. Return pipe
7. Fixing bolt (intermediate shaft/pinion shaft)
8, Nut (Steering gear mounting nut)
9. Bolt (Steering gear mounting bolt)
Removal note ..,.... ,.= . . . . . . . . . . . . . . . . . . . page N-
8
Installation note .,...I...,.......I........ page N- 9
IO. Steering gear and linkage
Disassembly I Inspection I Assembly
.,..,..,..I.........~..II.I...,...........1...I.. page N-10
N-7