Mazda 1990 323 Workshop Manual Supplement page 174

J3
CENTER DIFFERENTIAL LOCK MOTOR
-
03UOJ3-20.
03UOJ3-20
03UOJ3-20!
6. Remove the plug and turn shift rod 1 80° clockwise with the
screwdriver.
7. Remove the center differential lock motor from the transax-
le and transfer unit.
8. Remove the O-ring from the center differential lock motor.
9. Measure the shift rod length in FREE and LOCK position.
Standard length:
FREE: 75mm (2.95 in)
LOCK: 83mm (3.26 in)
Note
l
Apply ATF to the O-ring.
10. Fit a new O-ring onto the center differential lock motor.
11. Confirm that the flat edge of the shift rod is upward.
12. Turn the shift rod 1 80° counterclockwise with a screwdriver.
J3-96