Rear Differential - Mazda 1990 323 Workshop Manual Supplement

REAR DIFFERENTIAL
03UOMX-847
TRAILING LlNK LATERAL LINK
J
muoMx-848
03UOMX-84!
10. Install a new clip at the end of the output shaft.
11. Install the output shaft into the side gear by lightly tapping
with a plastic hammer.
12. Verify that the output shaft is hooked
pulling it by hand.
into the side gear by
13. Install the lateral link.
Tightening torque:
63-75 N-m (6.4-7.6 m-kg, 46-55 ft-lb)
14. Install the trailing link.
Tightening torque:
49-59 N-m (5.0-6.0 m-kg, 36-43 ft-lb)
15. Align the marks and reinstall the driveshaft.
Tightening torque:
49-59 N-m (5.0-6.0 m-kg, 36-43 ft-lb)
16. Add the specified oil through the filler plug hole until it
reaches the bottom of the hole.
Specified oil
Type:
Above -18*C @OF): GL-5, SAE 90
Below -18*C (OOF): GL-5, SAE 80W
Capacity:
0.65 liter (0.6 US qt, 0.5 Imp qt)
17. Install the filler plug and a new gasket.
Tightening torque:
39-54 N-m (4.0-5.5 m-kg, 29-40 ft-lb)
M-19