Mazda 1990 323 Workshop Manual Supplement page 441

TRANSAXLE AND TRANSFER UNIT
K2
r
r
I
03UOK2-26
03UOK2-2E
03UOK2-26
0
ii
2
. .
I3
14
1. Assemble the center differential lock shift fork assembly to
the center differential assembly, and install the center
differential assembly into the clutch housing.
2. Install the set bolt.
Note
l
Before coating with sealant, clean the contact
surfaces.
3. Coat both surfaces with sealant.
4. Install the transfer carrier assembly.
Tightening torque:
25-30 N,m (2.5-3.1 m-kg, 18-22 f&lb)
5. Install the idle gear.
6. Install the output shell to the output gear, and install the bear-
ing race onto the output shell.
Thrust bearing outer diameter: 72.1mm (2.84 in)
K2-265