Mazda 1990 323 Workshop Manual Supplement page 534

ENGINE SPEED SENSING POWER STEERlNG
I
93GONX-052
IDENTIFlCATION
1
93GONX-057
03UONX-829
Disassembly note
Oil pump
Note
l
As shown in the figure, when securring the oil pump
in a vise, be sure to use the SST so that force is not
applied to the pulley or shaft.
Assembly note
Rotor
1. Install the rotor to the shaft with the rotor's identification mark
facing upward.
Cam ring
1. Install the cam ring so that its identification mark is facing
downward.
Vane
1. Install the vanes (IO pieces) to the rotor, with the R part of
the vanes facing outward.
N-18