Mazda 1990 323 Workshop Manual Supplement page 443

TRANSAXLE AND TRANSFER UNIT
KZ
03UOKX.463
03UOKX-464
,
86UO7B-40 1
03UOKX-465
(2) Verify that the thrust bearing is properly installed.
(3) Install the turbine shaft and 3-4 clutch assembly into
the
transaxle case.
16. Install the internal gear.
(1) Install the internal gear to the 3-4 clutch drum
(2) Install the snap ring.
17. Install the carrier hub assembly.
(1) Verify that the thrust bearing and bearing race are
properly installed.
(2) Hold the turbine shaft with one hand to prevent it from
rotating.
(3) Install the carrier hub assembly into the 3-4 clutch drum
by rotating it.
18. Install the drive and driven plates.
Note
l
Installation order:
Driven-Drive-Driven-Drive-Driven-Drive-
Driven-Drive
K2-267