Mazda 1990 323 Workshop Manual Supplement page 45

INSTALLATION
B
03UOBX-84
03UOBX-834
03UOBX-835
Exhaust pipe
1. Install the exhaust pipe and a new gasket; then loosely tight-
en the locknuts @.
2. Loosely tighten the bracket nuts @.
3. Tighten the locknuts @
Tightening torque:
31-46 N.m (3.2-4.7 m-kg, 23-34 ft-lb)
4. Tighten the bracket nuts @J.
Tightening torque:
21-27 N.m (2.1-2.8 m-kg, 15-20 ft-lb)
Select and shift cable (MTX)
1. Install the select cable and the spring pin.
2. Install the shift cable and the spring pin.
Shift control cable (ATX)
1. Install the shift control cable and the spring pin.
Tightening torque:
6.9-l 1 Nnrn (70-l 10 cm-kg, 61-95 in-lb)
Speedometer cable
1. Connect the speedometer cable.
B-19