Mazda 1990 323 Workshop Manual Supplement page 407

1990 mazda 323 4-wheel drive workshop manual supplement

Hide thumbs Also See for 1990 323:

Table of Contents

AND TRANSFER

4. Install the rear control

body to the main control

Match the bolt head letter as shown.

6. Turn the assembly

over and install the orifice check valve

0.031 in) and spring, and the converter

in the main control

body as shown.

7. Install the orifice check valves (42.0mm,

0.079 in; @2.5mm,

0.098 in) and springs,

and the throttle relief ball and spring

in the premain

body as shown.

8. Install the gaskets on both sides of the main separator;

install it onto the premain

Show Quick Links

Chapters

Table of Contents