CAUTION
GI
9MUGIX-03
FUSE
PULLER
9MUGIX-032
SMUGIX-029
Fuse
Replacement
1. When
replacing
a fuse, be sure to replace
it with one of
specified
capacity.
If a fuse again fails after it has been replaced,
the circuit
probably
has a short
circuit
and the wiring
should
be
checked.
2. Be sure the negative
battery terminal
is disconnected
be-
fore replacing
a main fuse (80A).
3. When replacing
a pullout fuse, use the fuse puller supplied
in the fuse box cover.
Wiring Harness
Wiring color codes
Two-color
wires are indicated
by a two-color
code symbol.
The first letter indicates
the base color of the wire and the sec-
ond the color of the stripe.
--
GI-15