Mazda 1990 323 Workshop Manual Supplement page 378

K2
TRANSAXLE AND TRANSFER UNIT
IDLER GEAR (TRANSAXLE)
Preparation
SST
49 FTOI 439
Holder, idler gear
shaft
For
49 GO19 013
adjustment of
bearing preload
Bearing remover
49 0180 510B
Attachment,
steering worm
bearing preload
measuring
For
adjustment of
bearing preload
49 S120 785
Installer, boot
Disassembly / Assembly
1. Disassemble in the order shown in the figure, referring to Disassembly Note.
2. Inspect all parts and repair or replace as necessary.
3. Assemble in the reverse order of disassembly, referring to Assembly Procedure
For
removal of
bearing
03UOK2-196
For
installation of
bearing puter
race
REPLACE
m
10
\
128-177 (13-18, 94-130)
N.m (m-kg, ft-lb)
1, Locknut
7. Idler shaft
Disassembly
note . . . . . . . . . . . . . . . . . . . page K2-203
Inspect for wear and rough rotation
2. Bearing
8. Bearing outer race
Inspect for wear and rough rotation
Disassembly
note . . . . . . . . . . . . . . . . . . . page K2-203
3. Spacer
inspect bearing surface for scoring and
4. Idler gear
scratches
Inspect for wear and cracks
9. Bearing outer race
5. Adjust shim
Disassembly note . . . . . . . . . . . . . . . . . . . page K2-203
-
Adjustment of bearing preload
Inspect bearing surface for scoring and
6. Bearing
scratches
Inspect for wear and rough rotation
10. O-ring
K2-202