Mazda 1990 323 Workshop Manual Supplement page 528

N
ENGlNE SPEED SENSING POWER STEERING
f
I
93GONX-028
93GONX-029
Disassembly note
Oil pipe
Caution
l After
disconnecting the pipes, use a plug or adhe-
sive type tape to seal each port to prevent the en-
try of foreign materials.
Tie-rod
1. Use the SST to remove the b-rod.
Caution
l
To avoid scratching the rack, secure the rack in a
vise protected with brass pads or cloth.
Locknut
1. Use the SST to remove the locknut.
Housing cover
I1 Use a drill ($1.5mm (0.06 in)} to make a recessed area (ap-
prox. 15mm (0.06 in)) at the punch-crimped part of the
threaded part.
Caution
l
If the drill diameter and/or the depth of the recess
are excessive, the threads will be too loose when
the plug is reused.
Plug
1. Use the SST to remove the plug.
L
I
93GONX-030
N-12