Mazda 1990 323 Workshop Manual Supplement page 419

TRANSAXLE AND TRANSFER UNIT
K2
63G07C-14,
I
63G07C-14
r
-I
L
03UOK2-24. 3
L '
+' 4r'
THICKNESS
93UO7G04 0
El---
1. r,
a-
l
J
7. Insert the pinion shaft.
Center differential
1. Install the differential gear case sleeve.
2. Install the gear case needle bearings and spacer.
3. Install the planetary carrier assembly, gear case needle bear-
ing, sun gear, gear case needle bearing, and the
SST.
Measuring plate thickness: 4.3mm (0.169 in)
4. Measure the clearance between the
SST
and gear case
needle bearing.
If the clearance is not within specification, select the prop-
er washer from the chart below.
Standard: O.lO-0.30mm (0.004-0.012 in)
~1
5. Install the proper washer and the bearing inner race with
the
SST .
K2-243