TRANSAXLE
AND TRANSFER
UNIT
r
ONOMX-864
03UOJ3-08(
03UOJ3-08
03UOJ3-21
Drive pinion
1. Push out the drive pinion by attaching a miscellaneous nut
to the drive pinion and tapping it with a copper hammer.
Bearing outer race
Note
l
Identify
the bearing
outer races for proper
reas-
sembly.
1. Remove the bearing outer races by alternately tapping the
races at the two grooves in the carrier.
Bearing inner race (Drive pinion)
Note
l
Support the drive pinion by hand so that it does not
fall.
1. Remove the bearing with the SST.
Bearing Inner races (Side bearing)
Note
l
Support the ring gear by hand so that it does not fall.
1. Remove the bearing inner race with the SST.
--_I'
J3-44