Mazda 1990 323 Workshop Manual Supplement page 246

K2
TROUBLESHOOTING GUIDE
;TEP
INSPECTION
ACTION
4 Check if throttle cable operates smoothly and is
Yes Go to next step
installed correctly
w page K2-137
No Replace throttle cable w page K2-137
5 Check if line pressure at idle is OK
Yes Go to next step
w page K2-139
Line pressure:
Line pressure kPa (kg/cm , psi)
111 ~ No 1 Adjustthrottlecable
(3.6-4.4, 51-63) (8.9-10.6, 127-151)
wpageK2-139
' (6.1%&&37) (17.0120.5, 2i2-292)
6 Check if time lag is within specification at idle Yes Go to next step
w page K2-122
Time lag:
N + D: OX-l.0 second
N + R: 0.6-1.0 second
Check for cause (Refer to Evaluation)
c? page K2-122
7 Check if engine stall speed is OK
Yes
Go to next step
w page K2-119
Engine stall speed: 2,550-2,650 rpm
No
Check for cause (Refer to Evaluation)
~7 page K2-121
-
K2-70