TRANSAXLE
AND TRANSFER
UNIT
J3
Bearing inner race (Secondary
shaft end)
1. Install the new bearing inner race with the SST.
Note
l
Press to 19,620 N (2,000 kg, 4,400 lb).
1st gear, synchronizer
ring (1st) and clutch hub
assembly (1 st/2nd)
Note
l
Align the synchronizer
ring, grooves
and clutch
housing
hub keys when installing.
1. Assemble the 1 st gear, synchronizer ring (1 St), and clutch
hub assembly (lstMnd), as shown in the figure.
2. Press the clutch hub assembly (1 st/Znd) on with the SST.
Note
l
Press to 19,620 N (2,000 kg, 4,400 lb).
Synchronizer
ring (2nd), 2nd gear and secondary
3rd
gear
1. Install the synchronizer ring (2nd) and 2nd gear.
2. Install the secondary 3rd gear with the SST.
Note
l
Press to 19,620 N (2,000 kg, 4,400 lb).
Secondary
4th gear and bearing
inner race
1. Install the secondary 4th gear and new bearing inner race.
Note
l
Press to 19,620 N (2,000 kg, 4,400 lb).
03UOJ3-124
J3-65