Mazda 1990 323 Workshop Manual Supplement page 207

TROUBLESHOOTING GUIDE
K2
3 VEHICLE MOVES IN P RANGE OR PARKING GEAR NOT DISENGAGED WHEN P DISENGAGED
DESCRIP- *Vehicle rolls in P range but does not accelerate when accelerator depressed
HON *Vehicle will not move in Cl, S, L, and R ranges and engine in stall condition (Vehicle in stall condition)
[TROUBLESHOOTING HINTS]
3 Selector lever installation or adjustment incorrect
3 Parking mechanism malfunction
TEP
INSPECTION
ACTION
1 Check if selector lever operation is OK
Yes
Go to next step
w page *K-264
No Adjust or repair selector lever w page *K-264
IYI
2 Set selector lever in P range with vehicle on a Yes Check parking mechanism
gentle slope, release brakes, and check if vehi-
cle rolls
c3 If OK, go to next step.
c3 If not OK, repair of replace parking
mechanism
No Go to next step
3
Rebuild or replace transaxle
* Refer to 1990 323 Workshop Manual (1195lo-89E). 03UOK2-029
K2-31