Mazda 1990 323 Workshop Manual Supplement page 411

TRANSAXLE AND TRANSFER UNIT
K2
-I
9
1
I
03UOK2-220
-ATE
VALVE
CONTROL VALVE BODY
(ON-VEHICLE REMOVAL / INSTALLATION)
On-vehicle Removal
Caution
l
Clean the transaxle exterior thoroughly with a steam
cleaner or cleaning solvents before removal.
1. Disconnect the oil hose.
2. Drain the ATF into a suitable container.
3. Remove the control valve cover and the gasket.
4. Remove the throttle cable from the throttle cam of the valve
body.
5. Disconnect the solenoid connector.
6. Pinch the tangs of the solenoid connector and remove it
by pushing inward.
7. Remove the control valve body as an assembly.
On-vehicle Installation
Caution
l
Be sure
to align the manual plate and the manual
valve.
K2-235