Mazda 1990 323 Workshop Manual Supplement page 442

K2
TRANSAXLE AND TRANSFER UNIT
1
03UOK2-265
03UOK2-26t
I
03UOK2-267
03UOK2-26 8
03UOKX-461
7 . Apply a thin coat of silicone sealant to the contact surfaces
of the converter housing and transaxle case.
8. Install the new O-rings.
9. Mount the transaxle case to the converter housing.
Tightening torque:
37-52 N,m (3.8-5.3 m-kg, 27-38 ft-lb)
10. Install the SST to hold the turbine shaft.
11. Lift the idle gear slightly.
12. Install a new oil seal.
Note
l
Before coating with sealant, clean the contact
surfaces.
13. Coat the side cover and the converter housing with sealant.
14. Install the side cover.
Tightening torque:
A 37-52 N.m (3.8-5.3 m-kg, 27.5-38.3 ft-lb)
B 19-25 N.m (1.9-2.6 m-kg, 14-19 f&lb)
15. Install the turbine shaft and 3-4 clutch assembly.
(1) Assemble the turbine shaft and 3-4 clutch assembly.
K2-266