Mazda 1990 323 Workshop Manual Supplement page 423

TRANSAXLE AND TRANFER UNIT
K2
03UOK2-241
03UOK2-24
03UOK2-2~
7 -
I
03UOK2-249
03UOK2-250
Disassebly Note
Transfer carrier assembly
1. Mount the transfer carrier assembly on the
SST.
Bearing caps
1. Mark one bearing cap and the carrier.
Adjusting nuts
1. Mark one adjusting nuts and the carrier.
Locknut
1. Hold the companion flange with the
SST
and remove the
locknut.
Companion flange
1. Remove the companion flange with the
SST.
Drive pinion
1. Push the drive pinion out by attaching a miscellaneous lock-
nut to it, then tapping it with a brass hammer.
Bearing outer race
Note
l
For proper reassembly, identify the bearing outer
race.
1. Remove the bearing outer races by using the two grooves
in the carrier and tapping the races alternately.
K2-247