Mazda 1990 323 Workshop Manual Supplement page 33

REMOVAL
Step 2
J
OWOBX-07 5
1. Disconnect the harness connectors shown in the figure.
Removal note
P/S oil pump
Caution
l
Do not damage the hoses.
1. Remove the P/S oil pump with the hoses still connected.
2. Position the pump away from the engine and affix it with wire.
A/C compressor
Caution
l
Do not damage the hoses.
1. Remove the A/C compressor with the hoses still connected.
2. Position the compressor away from the engine and affix it
with wire.
OIL PRESSURE SWITCH ;E;g&ALE DIFFERENTIAL DIFFERENTIAL
STARTER
I
, LOCKJENSOR, LOC) MOTOR
PEED CONTROL
IGNITION COIL
NEUTRAL SWITCH
WH I ktr
THERMOSWITCH
BACK-UP LlbHT SWITCH
INHIBITOk SWITCH
B-7