Mazda 1990 323 Workshop Manual Supplement page 484

PROPELLER SHAFT
I
9TGOLX-024
03UOLX-82 1
ONOLX-82;
Snap ring
Caution
l
Use only new snap rings and ones of the same
thickness.
1. Install the thinnest snap rings
Caution
l
Align the marks on the propeller shaft and yoke.
2. Install the yoke to the propeller shaft.
3.
Lightly tap the
yoke
and propeller shaft flanges with a plas-
tic hammer to seat the cups.
4.
Measure
the starting torque of the spider.
Starting torque:
0.29-0.98 Mm (3-10 cm-kg, 2.60-8.68 in-lb)
5. Install different snap rings
to adjust
the starting torque if
necessary.
Snap ring thicknesses (19 types)
mm (in)
-
1.21 (0.0476)
1.22 (0.0480)
1.23 (0.0484)
1.24 (0.0488)
'I .25 (0.0492)
1.26 (0.0496)
1.27 (0.0500) 1.28 (0.0504)
f -29 (0.0508)
1.30 (0.0512)
1.31 (0.05l6)
1.32 (0.0520)
1.33 (0.0524)
1.34 (0.0528)
f -35 (0.0531)
i .36 (0.0535)
1.37 (0.0539)
1.38 IO.05431
I
1.39 (0.0547)
I
L-10