Table of Contents
Advertisement
Quick Start Guide
Connecting power
1
Plug the power cord into the power connector on the back of the
printer and plug the other endc into an appropriately-rated, grounded
outlet.
2
To turn on the printer, turn the power switch on at the rear of the
printer. The control panel will display the printer's model name, the
firmware version, status and progress of the power on self-test, and
status.
Using the control panel
The control panel at the right side of the printer includes eight buttons and a
display which indicates modes and settings. An overview is provided here so that
you can load media and ink cartridges. Details on menu options are included in
the Reference Guide on the system CD-ROM. The menu tree in Appendix C of
the Reference Guide also gives you a summary of all the printer modes and their
functions.
l
Load Media
l
Cut
l
Pause
l
Reset
Two types of menus are displayed: action menus provide a list of additional
menus or immediate tasks to perform, such as Cut, Load Media, etc. Selection
menus let you view and modify values.
12
l
Feed Media Menu
l
Setup Menu
l
Utility Menu
l
Advertisement
Table of Contents
