Figure 8-12 Removing The Main Motor, Paper-Feed Motor, Toner Cartridge Drive Motor And Cleaning Board - Tektronix PHASER 560 Service Manual

Cleaning board
Downloaded from www.Manualslib.com
1.
Remove the upper and lower rear covers, and the left side cover as
explained in the earlier procedure, "The printer cabinet" on page 8-2.
Remove the EMI shields as detailed in the earlier procedure "EMI
shields" on page 8-6.
2. Remove the engine control board and bracket as explained in the
previous procedure, "Engine control board" on page 8-17.
3. Disconnect the cleaning board's wiring harness.
4. Remove the two screws securing the cleaning board in place. Remove
the cleaning board.
5.
If necessary, to remove the cleaning board bracket, remove the two
screws securing the bracket in place. Note for reassembly the brackets
alignment pins.
Cleaning
board
Toner cartidge
drive motor
Paper feed
motor
Figure 8-12 Removing the main motor, paper-feed motor, toner cartridge drive motor and
cleaning board
manuals search engine
FRU Disassembly/Assembly
Main motor
Service Manual
8
9697-16
8-19