Specifications; Table 1-2 Physical Dimensions; Table 1-3 Printer Clearances - Tektronix Phaser 300i Service Manual

Specifications

Table 1-2 Physical dimensions

Dimensions
Height:
Width:
Depth:
Weight:

Table 1-3 Printer clearances

Clearances
Top:
Left:
Right:
Front
Rear:
Bottom:
Mounting surface
flatness:
Table 1-4 Functional specifications
Characteristic
Printing process
Color medium
Addressability
Printing speed
Specification
13.5 in. (29.8 cm)
25.5 in. (56.2 cm)
22 in. (48.5 cm), without tray installed
27 in (59.5 cm), with A-size paper tray installed
Approximately 101 lbs. (45 kgs)
Shipping weight is less than 150 lbs. (68.2 kgs)
Specification
24 in. (61 cm) for handfeeding and opening the top access
cover
3 in. (7.6 cm) for power cord
12 in. (30.5 cm) for waste bin removal
24 in. (61 cm) for cassette removal
6 in. (15.3 cm) for opening the rear access cover and
connecting computer cable
No obstruction under printer that could block its cooling vents.
Within 2 degrees of horizontal with all four feet in contact with
the surface.
Specification
Phase-change ink jet onto plain paper
Cyan, magenta yellow and black ink sticks, each
shape-coded. The printer uses the subtractive color system
to produce the colors red, green and blue. Black is created
both by using a black ink as well (by user selection) by
combining cyan, magenta and yellow.
300 dots-per-inch (horizontal and vertical).
Time from paper-load to paper-eject:
A-size
portrait
Standard mode: 83 sec
Enhanced: 141 sec 132 sec
Premium: 261 sec
Print times do not include image processing time, which can
vary depending on image complexity
General Information
B-size
landscape portrait
71 sec 132 sec
242 sec
231sec 463 sec
Service Manual
1
1-13