8
Field Replaceable Unit Disassembly/Assembly
Solenoid valve
8-16
Phaser 340 Color Printer
Tools required
Magnetic screwdriver
T-20 TORX tip
T-15 TORX tip
1.
Turn off the printer and remove the power cord.
2.
Remove the top and right-side covers as explained in the earlier topic,
"Cabinet panels and covers" on page 8-4.
3.
Disconnect the wiring harnesses leading to the solenoid valve from
I/O board 3.
4.
Disconnect the vacuum hoses leading to the solenoid valve.
5.
Remove the two screws securing the solenoid valve in place. Remove
the solenoid valve.