Ieee 802.11B Interface Kit (G813) - Ricoh B205 Service Manual

INSTALLING CONTROLLER OPTIONS

1.3.4 IEEE 802.11B INTERFACE KIT (G813)

Accessories
Check the accessories and their quantities against the following list:
Description
1. IEEE 802.11b Board ..............................................................1
2. PCI Card ................................................................................1
3. Antenna cap ..........................................................................1

CAUTION
TURN OFF THE MAIN POWER SWITCH AND DISCONNECT THE POWER SUPPLY CORD
NOTE: You can only install one of the following network interfaces at the same
time: IEEE 802.11b (Wireless LAN), IEEE1284 (Parallel/Centronics),
IEEE1394 (FireWire), Bluetooth.
1. Remove the cover [A] of board Slot 1 or 2 ( x1)
2. Attach the interface board [B] to the controller board ( x1 knob screw).
NOTE: Use a screwdriver to tighten the knob-screws. Do not tighten manually,
because this can disconnect the board.
3. With the printed side facing the front of the machine, insert the interface card
[C] board.
4. Attach the antenna cap [D].
B767/B846
[B]
14
Q'ty
[A]
[C]
[D]
B767I906.WMF
.
SM