E-Mail Parameters - Ricoh B205 Service Manual

E-mail Parameters

The initial settings of the following e-mail parameters are all "0" (all parameters
disabled).
Switch 00
No FUNCTION
0 HM Compression mode
for e-mail attachments
0: Off
1: On
1 HR Compression mode
for e-mail attachments
0: Off
1: On
2 MMR Compression mode
for e-mail attachments
0: Off
1: On
3-6 Not used
7
Designates the bits to
reference for compression
method of e-mail
attachments
0: Registered (Bit 0 to 6)
1: No registration.
Switch 01
No FUNCTION
0 Original width of e-mail
attachment: A4
0: Off
1: On
1 Original width of e-mail
attachment: B4
0: Off
1: On
2 Original width of e-mail
attachment: A3
0: Off
1: On
3-6 Not used
7 Designates the bits to
reference for original size
of e-mail attachments
0: Registered (Bit 0 to 6)
1: No registration.
B766
DEDICATED TRANSMISSION PARAMETERS
Switches HM compression on and off for files attached
to e-mails for sending.
Switches HR compression on and off for files attached
to e-mails for sending.
Switches MMR compression on and off for files
attached to e-mails for sending.
Do not change these settings.
The "0" selection (default) references the settings for
Bits 00, 01, 02 above. The "1" selection ignores the
selections of Bits 00, 01, 02.
Sets the original width of the e-mail attachment as A4.
Sets the original width of the e-mail attachment as B4.
Sets the original width of the e-mail attachment as A3.
Do not change these settings.
The "0" selection (default) references the settings for
Bits 00, 01, 02 above. The "1" selection ignores the
selections of Bits 00, 01, 02.
98
COMMENTS
COMMENTS
SM