Hot Roller And Fusing Lamp - Ricoh B205 Service Manual

3.9.4 HOT ROLLER AND FUSING LAMP

[A]
1. Remove the fusing unit. (
2. Remove: ( 3.9.3)
• Fusing upper cover.
• Pressure springs.
• Hot roller stripper bracket.
3. Remove the fusing lamps (
NOTE: Do not touch the surface of the fusing lamp with bare hands.
4. Replace the hot roller [B] (C-rings x2, Gear x1, Bushings x2).
Reinstallation
• When you reattach the C-rings, the flat sides must face the bearing/roller. (The
little hooks [C] must face away from the bearing/roller).
SM
[C]
3.9.1)
x4) and hot roller assembly [A].
3-33
FUSING/EXIT
[C]
[B]
B205/B209/D007/D008