Ricoh B205 Service Manual page 242

SERVICE PROGRAM MODE
4015* White Plate Scanning
4015 1 Start Position
Adjusts the scanning start position on the white plate for auto shading.
The default is 10.5 mm from the leading edge. The setting specifies how far
scanning starts from the default position.
[–5.0 ~ +5.0 / 0.0 / 0.1 mm/step]
4015 2 Scanning Area
Adjusts the width of the area on the white plate (in the sub scan direction) that is
scanned for auto shading.
The default is 4.76 mm. The current setting specifies the difference from this
default.
[–5.0 ~ +5.0 / 0.0 / 0.1 mm/step]
4301 APS Data Display
Displays the status of the APS sensors and platen/DF cover sensor (
4303* APS Small Size Original
Selects if the copier defaults to A5 SEF/LEF if the APS sensor cannot detect the
size of a small original.
[0~2/0/1]
0: Not detected as A5
1: Detected as A5 SEF
2: Detected as A5 LEF
4305* Original Size Detection
Selects whether the machine determines that the original is A4/LT, or 8K/16K.
8K/16K is not available for USA models.
[0 = Normal (LT for USA models, A4 for Europe/Asia models)
1 = Reversed [A4 for USA models, LT for Europe/Asia models]
2 = 8K/16K]
B205/B209/D007/D008 5-28
4.2.9).
SM