Input Check; Main Machine Input Check (Sp) - Ricoh B205 Service Manual

5.1.5 INPUT CHECK

Main Machine Input Check (SP5803)
1. Enter the SP mode and select SP5803.
2. Enter the number (1 – 11) for the item that you want to check. A small box will
be displayed on the SP mode screen with a series of 0's and 1's.
The meaning of the display is as follows.
0 0 0 0 0 0 0 0
Bit 7 6 5 4 3 2 1 0
3. Check the status of each item against the corresponding bit numbers listed in
the table below.
Number Bit
7 Paper Height Sensor 2 (2nd
Tray)
6 Paper Height Sensor 1 (2nd
Tray)
5 Paper Height Sensor 2 (1st
Tray)
1
4 Paper Height Sensor 1 (1st
Tray)
3 Paper End Sensor (2nd Tray)
2 Upper Relay Sensor
1 Lower Right Cover Open
0 Not used
7 Paper Exit Sensor
6 Fusing Unit
5 PCU Set
4 New PCU Sensor
2
3 Interchange Exit Sensor
2 1 bin Tray Unit Set
1 1 bin Tray Paper Sensor
0 Interchange Unit Set
7 Bridge Exit Sensor
6 Bridge Relay Sensor
5 Bridge Paper Sensor
4 Bridge Right Guide Switch
3
3 Bridge Left Guide Switch
2 Bridge Unit Set
1 Bridge Fan Motor Lock
0 Shift Tray Unit Set
SM
Description
Activated
Activated
Activated
Activated
Paper End
Activated
Closed
Activated
Unit Set
Activated
Activated
Activated
Unit Set
Activated
Unit Set
Activated
Activated
Activated
Activated
Activated
Unit Set
Locked
Unit Set
5-115
SERVICE PROGRAM MODE
Reading
0 1
Deactivated
Deactivated
Deactivated
Deactivated
Paper is present
Deactivated
Open
Deactivated
Unit not set
Deactivated
Deactivated
Deactivated
Unit not set
Deactivated
Unit not set
Deactivated
Deactivated
Deactivated
Deactivated
Deactivated
Unit not set
Unlocked
Unit not set
B205/B209/D007/D008