Ricoh B205 Service Manual page 73

[A]
[B]
6. Set the duplex unit [A] on the unit holder [B] or on the by-pass tray unit if it has
already been installed.
7. Attach the link [C] to the shaft [D] and secure it with the clip.
8. Connect the cable [E] and install the connector cover [F] (
9. If the by-pass tray has already been installed, skip this step: Install the unit
holder cover [G] (
10. Turn on the main power switch and check the duplex unit function.
SM
[C]
x 2).
1-43
INSTALLATION REQUIREMENTS
[D]
[E]
[G]
x 1).
B205/B209/D007/D008
[F]