Installation; Fax Unit B766 - Ricoh B205 Service Manual

FAX UNIT B766

1. INSTALLATION

1.1 FAX UNIT B766

CAUTION
Do the following before you install this option:
1. Print out all data in the printer buffer if there is a printer option in the
machine.
2. Turn off the main switch and disconnect the power cord and the
network cable.
1. Remove the application cover [A] of the controller ( x 1)
2. Remove the cover plate [B] ( x 2).
3. On the MBU [C], set the jumper [D] from OFF to ON.
4. Push down the MBU. Make sure that it is installed correctly
Important: SC819 occurs if the MBU is loose.
NOTE: If installing the optional G3 Interface Unit (B768), it should be installed
at this point. See 1.3 G3 Interface Unit B768.
5. Insert the fax unit [E] into the slot and attach it ( x 3).
SM
[A]
[B]
B766I101.WMF
1
[C]
[D]
[E]
B766I102A.WMF
B766