Test Pattern Printing (Sp) - Ricoh B205 Service Manual

SERVICE PROGRAM MODE
5.1.4 TEST PATTERN PRINTING (SP2902-3)
NOTE: Always print a test pattern to confirm correct operation of the machine.
1. Enter the SP mode and select SP2902 003.
2. Enter the number for the test pattern that you want to print and press
the tables below.)
3. Press Copy Window to open the copy window and then select the settings for
the test print (paper size, etc.)
4. Press Start
print.
5. Press SP Mode (highlighted) to return to the SP mode display.
No.
0 None
1 Vertical Line (1dot)
2 Horizontal Line (1dot)
3 Vertical Line (2-dot)
4 Horizontal Line (2-dot)
5 Grid Pattern (1dot)
6 Independent (1-dot)
7 Independent (2-dot)
8 100% Black Coverage
9 Belt Pattern
10 Trimming Area
11 Argyle
12 Argyle (2-dot)
13 Checkered Flag
14 Horizontal Belt
15 Independent (4-dot)
16 Grayscale Horizontal
17 Grayscale Vertical
18 Grayscale Horizontal/Vertical
19 Grayscale Grid
20 Grayscale Horizontal White Stripe
21 Grayscale Vertical White Stripe
22
Grayscale Horizontal/Vertical White Stripe
23 100% White Coverage
24 Trimming Area (OR Outside Data)
NOTE: See SP 4417 in the SP table for a different set of test patterns.
B205/B209/D007/D008
twice. (Ignore the "Place Original" messages) to start the test
Test Pattern
5-114
. (See
SM