Ricoh B205 Service Manual page 227

1911* 4th Bottom Plate Pressure Adjustment
1911 1 Normal Size (Optional PFU)
If a middle size threshold is not stored with SP19119, this SP adjusts the upper
paper lift motor reverse time for paper sizes larger than the small size threshold
set with SP19118.
If a middle size threshold is stored with SP19119, then this SP adjusts the motor
reverse time for sizes larger than the middle size.
Do not input a value greater than 1200.
Use this SP when a paper feed problem occurs from the 4th paper tray.
See "Optional Paper Tray Unit – Paper Lift Mechanism" for details on SP1911.
[0 ~ 2000 / 200 / 1 ms/step]
1911 2 Small Size (Optional PFU)
Adjusts the upper paper lift motor reverse time for paper of the same size as or
smaller than the small size threshold set with SP19118.
Do not input a value greater than 1200.
Use this SP when a paper feed problem occurs from the 4th paper tray.
See "Optional Paper Tray Unit – Paper Lift Mechanism" for details on SP1911.
[0 ~ 2000 / 600 / 1 ms/step]
1911 3 Middle Size (Optional PFU)
Adjusts the upper paper lift motor reverse time for paper sizes larger than the
small size threshold set with SP19118, up to and including the middle size
threshold set with SP19119. If a middle size threshold is not stored with SP19119,
this SP is not used.
Do not input a value greater than 1200.
Use this SP when a paper feed problem occurs from the 4th paper tray.
See "Optional Paper Tray Unit – Paper Lift Mechanism" for details on SP1911.
[0 ~ 2000 / 200 / 1 ms/step]
4th Bottom Plate Pressure Re-adjustment
1911 4 Small Size
(Optional PFU)
Adjusts the upper paper lift motor forward rotation time for paper of the same size
as or smaller than the small size threshold set with SP19118. The motor rotates
forward when the remaining paper amount is lower than the value of SP19116.
Use this SP when a paper feed problem occurs when paper in the 4th paper tray
is running low.
See "Optional Paper Tray Unit – Paper Lift Mechanism" for details on SP1911.
[0 ~ 2000 / 400 / 1 ms/step]
1911 5 Middle Size (Optional PFU)
Adjusts the upper paper lift motor forward rotation time for paper sizes larger than
the small size threshold set with SP19118, up to and including the middle size
threshold set with SP19119.
The motor rotates forward when the remaining paper amount is lower than the
value of SP19117.
If a middle size threshold is not stored with SP19119, this SP is not used.
Use this SP when a paper feed problem occurs when paper in the 4th paper tray
is running low.
See "Optional Paper Tray Unit - Paper Lift Mechanism" for details on SP1911.
[0 ~ 2000 / 300 / 1 ms/step]
SM
SERVICE PROGRAM MODE
5-13 B205/B209/D007/D008