PRINTER AND P/S OPTIONS
Installation
CAUTION
TURN OFF THE MAIN POWER SWITCH AND DISCONNECT THE POWER SUPPLY CORD
1. Remove cover [A] (
2. Remove controller board [B] (
3. Install the 256 MB memory [C].
NOTE
• The RPCS Printer Unit does not require
the HDD unit.
4. For the HDD unit attach:
• Harness clamp [D]
• Double standoff [E]
• Single standoff [F]
5. Attach the HDD [G] to the controller
board (
x2).
D318
x1).
x2).
[E]
8
.
[A]
[C]
[D]
[G]
[F]
[B]
SM