Ricoh B205 Service Manual page 653

FAX UNIT B766
11. Attach the G3 decal [A] as shown.
12. If the ADF has been installed, install
the stamp cartridge [B] in the ADF as
shown.
13. Connect the telephone line to the
"LINE" jack at the left of the machine.
14. Connect the machine's power cord.
Then turn on the main power switch.
NOTE: The machine must be connected
to a correctly grounded socket outlet.
Important
• After you turn the machine on, if you see a message that tells you the SRAM
has been formatted due to a problem with SRAM, turn the machine off and
on again to clear the message.
15. Be sure to set the clock (date and time) with the User Tools.
16. Go into service mode and program the serial number into the fax unit with
SP3102. You can find the serial number on the serial number label (attached to
the machine in Step 9).
SM
[A]
[B]
3
B766I903.WMF
B766I902.WMF
B766