Tray Heater (Optional Lct) - Ricoh B205 Service Manual

INSTALLATION REQUIREMENTS

1.19 TRAY HEATER (OPTIONAL LCT)

[A]
[D]
[B]
[A]
[F] [E]
[C]
[D]
[G]
CAUTION
Unplug the machine power cord before starting the following procedure.
1. Remove two joint brackets [A] ( x 1 each).
2. Remove the rear cover for the LCT [B] ( x 2).
3. Slide out the paper tray [C].
4. Push the stopper [D] on both slide rails and remove the paper tray.
5. Pass the connector [E] through the opening [F].
6. Install the tray heater [G] ( x 1).
SM 1-63 B205/B209/D007/D008